Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 8:38am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› oblem with
‹
Previous topic
|
Next topic
›
Pages: 1
oblem with (Read 1673 times)
Mahavir
New Member
Offline
Posts: 8
India
oblem with
Nov 12
th
, 2008, 8:35am
hi friends
i have a problem with verilogAMS tool in cadence
when i open my cadence tool and go to file-new-cellview for verilogAMS editor
i get following message
A Skill error occurred in function vmsDataTrigger
DataTrigger for viewType verilogAMSText failed
I am not able to understand what the error is?
Are there any other verilogAMS tools that i can use? any tool from xilinx in particular?
Thanks in Advance
Mahavir
To Geofery:
Sir, I am trying to contact cadence people as well through email.
Back to top
IP Logged
jbdavid
Community Fellow
Offline
Posts: 378
Silicon Valley
Re: oblem with
Reply #1 -
Nov 12
th
, 2008, 9:00am
YOur env probably has a template script setup..
something like the following in your .cdsinit file
Code:
vmsTemplateScript = "/path/to/file/script.sh"
Make sure the thing it points to exists and is executable..
--
thats my guess
Back to top
jbdavid
Mixed Signal Design Verification
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.