Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

How to set the properties of the ideal adc modle in Cadence? (Read 2318 times)

liletian

Community Member

Offline

Posts: 97
MD

How to set the properties of the ideal adc modle in Cadence?
Apr 19^th, 2009, 8:05pm

want to simulate the performance of the ideal adc using the adc_8bit_ideal model in the Cadence tools shown in Fig 1,
but I had trouble to get correct output, can anyone give me some suggestion. Basically I gave Vpulse (1M) as clk, and Vsin(1V) as input, I set the reference voltage as 1V, I ran a transient simulation and all ADC output is zero, can anyone give me some suggestions?
Thank you

IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: How to set the properties of the ideal adc modle in Cadence? Reply #1 - Apr 22^nd, 2009, 11:43pm You didn't include "Fig 1" so hard to know how you've connected things up. Regards, Andrew.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›