The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 18th, 2024, 1:25am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › AMS Simulators › Analog block in AMS simulation
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Analog block in AMS simulation (Read 95 times)
jefkat
Community Member
***
Offline



Posts: 69
Analog block in AMS simulation
May 04th, 2009, 6:49am  
Hi,
  I am trying to run a mixed sig 'AMS sim'. IRUN gives an error in the elaboration phase that goes like

"ncelab: *E,CUVMUR: instance 'Tb_RCAL.I0' of design unit 'RCAL' is unresolved in 'worklib.Tb_RCAL:vams'"

RCAL is my analog block. How can I resolve this?

Any help would be much appreciated.

Thanks
shaf
Back to top
 
 
View Profile   IP Logged
Paul Floyd
New Member
*
Offline



Posts: 8
France
Re: Analog block in AMS simulation
Reply #1 - May 6th, 2009, 12:04am  
Hi

Post the source. If it's confidential, try to reduce it to the smallest testcase that reproduces the problem, and post that.

Paul
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.