The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 19th, 2024, 8:22am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Signal Design › Poles and zeros
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Poles and zeros (Read 1782 times)
sanjaybiradar
New Member
*
Offline



Posts: 1
Bangalore
Poles and zeros
Jun 18th, 2009, 1:53am  
Hi All,

How to determine zeros and poles in two stage opamp? Is thr any formula for getting these two ?

Thanks and regards
Sanjay Biradar
Back to top
 
 
View Profile   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: Poles and zeros
Reply #1 - Jun 18th, 2009, 4:19am  
hi,
  please reefer razaavi..you can get directly get

thanks,
Rajasekhar.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.