The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 28th, 2024, 2:29pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Pole splitting with R load
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Pole splitting with R load (Read 1368 times)
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Pole splitting with R load
Aug 10th, 2009, 11:42am  
hi,
   can any body please explain how resistive load will give pole splitting in a two stage amplifier? may be due to reduction in the 2nd stage o/p impedance 2nd pole pole frequency may increase..but how first stage pole will decrease?

Thanks,
Rajasekhar.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.