The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 10:35am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › who know some parameters of wlan/802.11a in simulation?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
who know some parameters of wlan/802.11a in simulation? (Read 1334 times)
waseda-rfic
Community Member
***
Offline



Posts: 46
who know some parameters of wlan/802.11a in simulation?
Aug 24th, 2009, 11:14pm  
I simulation the ACPR of PA in ADS or CADENCE. who know the the parameters of the mainband, the upper band and the low band of wlan/802.11a ? and the ACPR should below which value in order to satisfy the specification?
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.