The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 18th, 2024, 3:51am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Replica Bias schemes
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Replica Bias schemes (Read 2567 times)
AnalogGR
New Member
*
Offline



Posts: 3
Replica Bias schemes
Sep 11th, 2009, 5:21am  
Hi,

Hi,

Can anyone help in understanding why we use the replica bias schemes?

Any proposed source of info would be appreciated

Regards

george best
Back to top
 
 
View Profile   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: Replica Bias schemes
Reply #1 - Sep 12th, 2009, 6:39am  
hi,
  replica biasing is mainly to get exact matching between main circuit and bias circuit. you can refer jhn menatis pll papers for that

Thanks,
Rajasekhar.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.