The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 15th, 2024, 1:54pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › skill function to force ADE quit
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
skill function to force ADE quit (Read 1819 times)
Dipankar
Community Member
***
Offline



Posts: 59
skill function to force ADE quit
Nov 19th, 2009, 9:28am  
Sometimes ADE gets hanged spcially while plotting a large psf  data. Is there anyway to kill ADE process by some SKILL command from CIW ?
Back to top
 
 
With Thanks and Regards,
Dipankar.
View Profile   IP Logged
Riad KACED
Community Member
***
Offline



Posts: 93
Swindon, UK
Re: skill function to force ADE quit
Reply #1 - Nov 19th, 2009, 11:52am  
Hi Dipanker,

Ih the ADE hang leaves you the chance to type-in commands into the CIW, then you may try:
CIW> sevQuit(window(ADE_WIN_#)~>sevSession)

Cheers,
Riad.
Back to top
 
 
Riad KACED
PDK, EDA Support Engineer.
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.