Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

Prefix adders (Read 2647 times)

akhil

New Member

Offline

Posts: 9

Prefix adders
Mar 06^th, 2010, 10:30pm

I plan to design a 64 bit Brent Kung adder..
While writing the verilog code , I had a doubt as i have the code for the 16 bit Brent Kung ..can the 16 bit module be used to design a 64 bit adder or should it be done seperately ..
as in would it affect the speed of the adder ?

Secondly, can i get a pictorial representation of the 64 bit brent kung adder because it becomes easy to code it

IP Logged

Marq Kole Senior Member Offline Hmmm. That's weird... Posts: 122 Eindhoven, The Netherlands	Re: Prefix adders Reply #1 - Mar 8^th, 2010, 6:59am Hi, This is the section for Verilog-AMS, so that's the mixed-signal extensions to Verilog. Although Verilog 1364-2008 is a full subset of the Verilog-AMS 2.3.1 language, I think you will find that the people that could answer your question normally do not visit this forum. Cheers, Marq
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›