The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 18th, 2024, 12:32am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › relation between overdrive and IM3, 1-dB compression:
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
relation between overdrive and IM3, 1-dB compression: (Read 2040 times)
A Kumar R
Community Member
***
Offline



Posts: 72
India
relation between overdrive and IM3, 1-dB compression:
Mar 20th, 2010, 2:47am  
hello....

i am designing an RF mixer in 180nm CMOS technology...

is there any relation between overdrive voltage and intercept point and 1-dB compression point in mixers?

if so..please explain to me or suggest any paper.

thank you all.....
Back to top
 
 
View Profile   IP Logged
aaron_do
Senior Fellow
******
Offline



Posts: 1398
Re: relation between overdrive and IM3, 1-dB compression:
Reply #1 - Mar 20th, 2010, 10:52pm  
Hi,



I recommend a paper called "intermodulation distortion in current commutating CMOS mixers" by M. Terrovitis and R. G. Meyer, JSSC, October 2000.

cheers,
Aaron
Back to top
 
 
there is no energy in matter other than that received from the environment - Nikola Tesla
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.