The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 20th, 2024, 9:18pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › differential PFD in DLL sensitive to rise/fall time mismatch
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
differential PFD in DLL sensitive to rise/fall time mismatch (Read 951 times)
supermoment
Senior Member
****
Offline



Posts: 167
differential PFD in DLL sensitive to rise/fall time mismatch
Jun 18th, 2010, 1:18am  
differential PFD in DLL

I found that when using differential PFD, it is very sensitive to the rise/fall time mismatch.

Any solutions to solve this?


Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.