The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 18th, 2024, 4:52am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › LVS errors
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
LVS errors (Read 2301 times)
NOHA
New Member
*
Offline



Posts: 2
LVS errors
Aug 03rd, 2010, 1:36am  
Dear All,

Kindly I have faced some LVS errors when I run LVS on I/Os ring and they are as following:

(1) unstable device for ydio_DIODE_1325

(2) <npvss49> ntab_not_var connected to GROUND

Thanks in advance
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.