The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 1:48pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Simulate steup and hold time of DFF
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Simulate steup and hold time of DFF (Read 2547 times)
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
Simulate steup and hold time of DFF
Aug 30th, 2010, 3:05am  
Hi Guys,

I want to get the setup and hold time of a DFF over all PVT corners. Is there any easy method in ADE using spectre simulator?

Thanks
Yawei
Back to top
 
 
View Profile   IP Logged
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
Re: Simulate steup and hold time of DFF
Reply #1 - Sep 20th, 2010, 2:42am  
Hi Guys,

I recall that there is a tool named bi-section in HSPICE that is very useful to simulate setup/hold time of DFF. Is there any similar tool in spectre?

Thanks
Yawei
Back to top
 
 
View Profile   IP Logged
sheldon
Community Fellow
*****
Offline



Posts: 751
Re: Simulate steup and hold time of DFF
Reply #2 - Sep 20th, 2010, 4:12am  
Yawei,

  Look at SpectreMDL, it should be able to do what you want.

                                                        Best Regards,

                                                          Sheldon
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.