Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Aug 1^st, 2024, 1:13am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Analog Design › Layout tips

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Layout tips (Read 2817 times)

ninge New Member Offline Posts: 1 India	Layout tips Nov 16^th, 2010, 7:58pm Hi All !!! Please start the discussion about RF/Anaolg Floor Planning and routing guidelines for and RF Analog and Mixed signal Chips and Also Layout thumb rules.. Thanks in Advance, Ninge
Back to top	Thanks & Regards, Ninge Bangalore India IP Logged

raja.cedt Senior Fellow Offline Posts: 1516 Germany	Re: Layout tips Reply #1 - Nov 16^th, 2010, 9:31pm hi, better have look at razaavi or art of analog layout. Thanks.
Back to top	IP Logged

Lex Senior Member Offline Posts: 201 Eindhoven, Holland	Re: Layout tips Reply #2 - Nov 17^th, 2010, 1:33am Art of Analog layout by Hastings is a good starting point. You might also want to look at the layout sections in CMOS circuit design, layout and simulation by Baker.
Back to top	IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: Layout tips Reply #3 - Nov 22^nd, 2010, 2:18pm IC Mask Design, IC Layout Basics - McGraw Hill, By Saint & Saint
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.