Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 18
th
, 2024, 3:37pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
Circuit Simulators
› How to get data of stb analysis in calculator?
‹
Previous topic
|
Next topic
›
Pages: 1
How to get data of stb analysis in calculator? (Read 2788 times)
ywguo
Community Fellow
Offline
Posts: 943
Shanghai, PRC
How to get data of stb analysis in calculator?
Dec 03
rd
, 2010, 1:29am
Hi Guys,
How do I get the data of stb analysis in calculator. I want to measure the phaseMargin, gainMargin using the functions in calculator. Since I have to run a lot of corners, obviously it is not an efficient way to record stability summary in
Direct Plot
-->
Main Form
-->
stb
form.
Thanks
Yawei
Back to top
IP Logged
sheldon
Community Fellow
Offline
Posts: 751
Re: How to get data of stb analysis in calculator?
Reply #1 -
Dec 3
rd
, 2010, 2:18am
Yawei,
From the Results Browser, RMB click on the parameter you want: gain
margin, phase margin, ... and send it to the Calculator. Once it is in the
Calculator you can save it to an output.
Best Regards,
Sheldon
Back to top
IP Logged
Frank Wiedmann
Community Fellow
Offline
Posts: 678
Munich, Germany
Re: How to get data of stb analysis in calculator?
Reply #2 -
Dec 3
rd
, 2010, 3:51am
Another possibility is to select the "Add To Outputs" button in the Direct Plot form. You can then look up the corresponding expressions in ADE with Setup -> Outputs and manually copy them to the calculator.
Back to top
IP Logged
ywguo
Community Fellow
Offline
Posts: 943
Shanghai, PRC
Re: How to get data of stb analysis in calculator?
Reply #3 -
Dec 4
th
, 2010, 3:44am
Hi Sheldon and Frank, I got it. Thank you.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
»» Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.