The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 11:30am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › effective cmos tuning of quartz oscillator
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
effective cmos tuning of quartz oscillator (Read 1439 times)
Evgenii
Community Member
***
Offline



Posts: 34
effective cmos tuning of quartz oscillator
Dec 17th, 2010, 6:41am  
I have classic model of 30MHz quartz (Lm, Cm, Rm and C0; Cload) Tuning with changes capacitance of load is not effective....Tuning range up to 2KHz  gives range Cload 1pF-20pF. I needed ~ 10KHz-12KHz. I think, that  tuning with changes of  cmos inductor also not feasible ...
Please, give me  some advice
Thanks Smiley
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.