The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 7:25am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Ultrasim HighZ check
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Ultrasim HighZ check (Read 1502 times)
analogue_guy
Community Member
***
Offline



Posts: 38
Ultrasim HighZ check
Feb 14th, 2011, 4:44am  
Hi all,

do you know, if the HighZ node check in Ultrasim work only with special transistor models (e.g. BSIM) or it should work with all (e.g. BSIM 3, BSIM4,PSP,MOS11,MOS9...)?

Thanks.

BR
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.