Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Aug 16^th, 2024, 3:14pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › RF Design › zero-IF receiver and SSB signal

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

zero-IF receiver and SSB signal (Read 1949 times)

baohulu Community Member Offline Posts: 43 china	zero-IF receiver and SSB signal Mar 24^th, 2011, 4:19am hi, all what kind of modulated signal can be received by zero-IF, does only SSB can use zero-IF, and why? in most analog tv receiver, they choose low-IF receiver, why do not they use zero-IF architecture? thanks
Back to top	IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: zero-IF receiver and SSB signal Reply #1 - Mar 24^th, 2011, 6:40am See: http://www.designers-guide.org/Forum/YaBB.pl?num=1300100596
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.