Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 9:25am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› characteristic impedance calculator
‹
Previous topic
|
Next topic
›
Pages: 1
characteristic impedance calculator (Read 3857 times)
vp1953
Senior Member
Offline
Posts: 172
characteristic impedance calculator
Apr 05
th
, 2011, 5:00pm
Hi
I am wondering if there are any calculators out there that will provide the width for a 50 ohm transmission line, for different FR4 board thicknesses.
Thank you in advance.
Back to top
IP Logged
apprentice
Community Member
Offline
Posts: 32
Re: characteristic impedance calculator
Reply #1 -
Apr 5
th
, 2011, 8:00pm
AWR microwave office - txline
Agilent ADS - line cal
Back to top
IP Logged
vp1953
Senior Member
Offline
Posts: 172
Re: characteristic impedance calculator
Reply #2 -
Apr 6
th
, 2011, 9:50am
Hi Apprentice,
Thanks very much!
Back to top
IP Logged
loose-electron
Senior Fellow
Offline
Best Design Tool =
Capable Designers
Posts: 1638
San Diego California
Re: characteristic impedance calculator
Reply #3 -
Apr 8
th
, 2011, 2:06pm
There are online calculators on some PCB sites for this
Go do some searching, its out there
Back to top
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
IP Logged
rfcooltools.com
Senior Member
Offline
Posts: 159
Re: characteristic impedance calculator
Reply #4 -
Apr 18
th
, 2011, 5:50pm
vp1953,
You can use the rfcooltools for this by placing a series t-line component between two ports and playing around with the Height , Er and Width. It is pretty basic. I have not implemented loss tangent yet but that effect is usually a second order effect for most applications.
http://rfcooltools.com
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.