Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 9:33am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› Communication standard selection
‹
Previous topic
|
Next topic
›
Pages: 1
Communication standard selection (Read 1380 times)
lunren
Community Member
Offline
Posts: 82
Asia
Communication standard selection
Sep 03
rd
, 2011, 5:52pm
Hi All,
I am wondering for wireless communication of 3~4m (low data rate, 2~20kb/s), which standard is the best choice? Blue tooth, 802, RFID, or others?
Thanks,
Lunren
Back to top
Best Regards,
Lunren
IP Logged
loose-electron
Senior Fellow
Offline
Best Design Tool =
Capable Designers
Posts: 1638
San Diego California
Re: Communication standard selection
Reply #1 -
Sep 6
th
, 2011, 4:25pm
Which 802? 802.11, 802.15.4, or?????
There are many standards out there, and it sounds to me like you need to start doing some research.
Define what you need and then start looking into what fits those needs.
Back to top
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.