Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 16
th
, 2024, 8:28am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› 230 -240 MHz range FM transmitter
‹
Previous topic
|
Next topic
›
Pages: 1
230 -240 MHz range FM transmitter (Read 3297 times)
sureshdezoysa
New Member
Offline
Posts: 4
230 -240 MHz range FM transmitter
Nov 11
th
, 2011, 7:01am
Hi,
I am seeking a suitable circuit diagram of a transmitter which in 230-240 MHz range for my electronic project. it should only consume about 50 mW.I appreciate if someone can help me.
thank you,
Back to top
IP Logged
raja.cedt
Senior Fellow
Offline
Posts: 1516
Germany
Re: 230 -240 MHz range FM transmitter
Reply #1 -
Nov 11
th
, 2011, 7:50am
is FM transmitter send signals @ 230Mhz or 88MHz?, is it board level or ic level?
Thanks,
Raj.
Back to top
IP Logged
loose-electron
Senior Fellow
Offline
Best Design Tool =
Capable Designers
Posts: 1638
San Diego California
Re: 230 -240 MHz range FM transmitter
Reply #2 -
Nov 11
th
, 2011, 10:06am
http://search.digikey.com/us/en/cat/rf-if-and-rfid/rf-transmitters/3539947?k=FM%...
start there
Back to top
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
IP Logged
sureshdezoysa
New Member
Offline
Posts: 4
Re: 230 -240 MHz range FM transmitter
Reply #3 -
Nov 11
th
, 2011, 10:37pm
@ raj
Actually i haven't much knowledge about transmitters..but it must be work in 230-240MHz.
Thanks,
Back to top
IP Logged
sureshdezoysa
New Member
Offline
Posts: 4
Re: 230 -240 MHz range FM transmitter
Reply #4 -
Nov 11
th
, 2011, 10:42pm
,
Back to top
IP Logged
sureshdezoysa
New Member
Offline
Posts: 4
Re: 230 -240 MHz range FM transmitter
Reply #5 -
Nov 11
th
, 2011, 10:48pm
loose-electron wrote
on Nov 11
th
, 2011, 10:06am:
http://search.digikey.com/us/en/cat/rf-if-and-rfid/rf-transmitters/3539947?k=FM%...
start there
Thanks,,
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.