Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
May 3
rd
, 2024, 11:45am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
AMS Simulators
› paramdef with spectre
‹
Previous topic
|
Next topic
›
Pages: 1
paramdef with spectre (Read 2195 times)
tupak
New Member
Offline
Posts: 1
paramdef with spectre
Nov 15
th
, 2011, 3:08am
I have try to use the paramedef directive with spectre but it does seem to work. I am trying to do something like in the next reference:
http://www.designers-guide.org/verilogams/paramset.pdf
Is if because the version is old ?
Does everybody know whether this directive is implemented or will be implemented in spectre?
cadence_mmsim 7.0.0.073
Regards
Juan
Back to top
IP Logged
Geoffrey_Coram
Senior Fellow
Offline
Posts: 1998
Massachusetts, USA
Re: paramdef with spectre
Reply #1 -
Jan 12
th
, 2012, 11:14am
tupak wrote
on Nov 15
th
, 2011, 3:08am:
I have try to use the paramedef directive
What's paramedef? There is paramset in recent versions of mmsim, but:
Quote:
cadence_mmsim 7.0.0.073
that's rather old. (I don't know when paramset was added.)
Back to top
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
»» AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.