Designer’s Guide Community

chandu28 Junior Member Offline Posts: 21 vellore	Re: DRAM DESIGN Reply #30 - Jan 09^th, 2012, 9:26pm thank you sir for the links they very informative.....:) now the question is how to get the hardware form... from the information i gathered, i can draw an FSM or write a code in C or Verilog...but how to get it to hardware form....means circuit diagram sir.... Sincerely, M.S.Chandra Sekhar.
Back to top	IP Logged

chandu28 Junior Member Offline Posts: 21 vellore	Re: DRAM DESIGN Reply #31 - Jan 27^th, 2012, 9:01am hello sir, i have an idea like writing a code for sdram controller,after that synthesizing the code which gives me a schematic... i will redesign the schematic and connect it to the main diagram.... will that work??? awaiting your reply... sincerely M.SChandra Sekhar
Back to top	IP Logged

chandu28 Junior Member Offline Posts: 21 vellore	Re: DRAM DESIGN Reply #32 - Feb 2^nd, 2012, 8:33pm Hello sir I have simulated a code in Xilinx ISE and synthesized it too. after that I got two schematics RTL and technology .... If I want to use the schematic for another circuit in mentor graphics which one to use???? awaiting your reply, sincerely , M.S.Chandra Sekhar
Back to top	IP Logged

loose-electron

Senior Fellow

Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California

Re: DRAM DESIGN
Reply #33 - Feb 11^th, 2012, 5:22pm

It is very difficult to answer questions on things that should be found by your efforts in textbooks, published papers, applications notes and guidelines to using design tools.

Reads the manuals on the design tools, search the internet for information on transporting designs between design tools. If you have a target design platform you are going to make something on, ask the supporters of that platform how to use it and how to transport designs into it.

All of these things are part of being a design engineer.

Back to top

Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical

IP Logged

chandu28 Junior Member Offline Posts: 21 vellore	Re: DRAM DESIGN Reply #34 - Feb 11^th, 2012, 7:47pm Thank you sir sincerely M.S.Chandra Sekhar
Back to top	IP Logged