Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Sep 8^th, 2024, 5:24am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Analog Design › VCO Design Guidance

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

VCO Design Guidance (Read 2354 times)

lokesh gandhi New Member Offline Posts: 4	VCO Design Guidance Dec 18^th, 2011, 10:57pm Dear all, I am a student of VLSI and new to Analog Design. I am interested to design a VCO, and is looking forward for guidance in this regard.
Back to top	Thanks, Loks IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: VCO Design Guidance Reply #1 - Dec 19^th, 2011, 1:23pm Take a large block of silicon... Cut away anything that doesn't look like a VCO... Suggest you start by doing some basic research.
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

raja.cedt Senior Fellow Offline Posts: 1516 Germany	Re: VCO Design Guidance Reply #2 - Dec 20^th, 2011, 12:34am hello, better read razavi analog design book. It has very good starting on VCO. In fact you can use those ring oscillators in your real time design Thanks, raj.
Back to top	IP Logged

lokesh gandhi New Member Offline Posts: 4	Re: VCO Design Guidance Reply #3 - Dec 21^st, 2011, 8:02am Thank you loose-electron. Thank you raja
Back to top	Thanks, Loks IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.