The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 4th, 2024, 1:04pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › Layout extraction
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Layout extraction (Read 877 times)
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Layout extraction
Jan 11th, 2012, 12:29pm  
hello,
can any one please tell me is there any option in assura to extract metal inductance. If no what are the other tools available for this?

Thanks,
Raj.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
Re: Layout extraction
Reply #1 - Jan 16th, 2012, 5:39pm  
Yes, I think so. There are RLC and RLCK. I don't know that K means. But there must be parasitic inductors in both modes.

My Assura version is 4.12.005.

-- Yawei
Back to top
Assura_QRC.png  
 
Assura_QRC.png
View Profile   IP Logged
Frank Wiedmann
Community Fellow
*****
Offline



Posts: 678
Munich, Germany
Re: Layout extraction
Reply #2 - Jan 18th, 2012, 6:19am  
K is mutual inductance.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.