The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 3rd, 2024, 4:17pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › AMS Simulators › ADS simulator IC-CAP
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
ADS simulator IC-CAP (Read 1777 times)
Polux
Junior Member
**
Offline



Posts: 15
ADS simulator IC-CAP
Feb 08th, 2012, 12:47am  
hello, I am simulation a circuit of a new mosfet model in IC-CAP using the ADS simulator. Does anyone knows what the following error means??

"Error:Raw data file does not contain correct signal name"
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.