The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 11th, 2024, 6:17am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Passive filter implementation for high pass filter in an ECG IC....
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Passive filter implementation for high pass filter in an ECG IC.... (Read 1408 times)
gido
Junior Member
**
Offline



Posts: 23
Passive filter implementation for high pass filter in an ECG IC....
Feb 13th, 2012, 1:49am  
Hello,
can I use a passive filter implementation for my high pass filter in an ECG IC???
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: Passive filter implementation for high pass filter in an ECG IC....
Reply #1 - Feb 16th, 2012, 12:32pm  
The answer is probably yes.

However - Post a much more detailed definition of your question
and you will get a much more useful answer.
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.