loose-electron
Senior Fellow
![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif)
Offline
![](https://designers-guide.org/forum/avatars/fredflinstone.gif)
Best Design Tool = Capable Designers
Posts: 1638
San Diego California
|
are you talking board level design with an opamp or chip level design of an opamp?
board level = driving capability under capacitive loading
chip level = gain vs. phase characteristics to maintain feedback stability.
Also at the chip level, an opamp usually does not have an output capacitor as part of the design, but an OTA (opertional transconductance amplifier) does.
|