The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 29th, 2024, 10:03pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › AMS Simulators › Which one dominates, timescale in irunArgs or std cell module?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Which one dominates, timescale in irunArgs or std cell module? (Read 3063 times)
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
Which one dominates, timescale in irunArgs or std cell module?
Mar 31st, 2012, 3:46am  
Hi Guys,

The timescale is 1ns/1ps in irunArgs, but it is 1ns/1ns in my netlist. The netlist file is created in ADE. Which one dominates?

The tools are IC 6.1.4.500.10, mmsim 11.1.0.249.isr2, and incisive 10.20-s043. I select OSS-based netlister with irun.

Thanks in advance.

Best Regards,
Yawei
Back to top
 
« Last Edit: Mar 31st, 2012, 10:22pm by ywguo »  
View Profile   IP Logged
boe
Community Fellow
*****
Offline



Posts: 615
Re: Which one dominates, timescale in irunArgs or std cell module?
Reply #1 - Apr 2nd, 2012, 11:43am  
Ywguo,
IIRC, the setting in Args is default, and is overridden by timescale statements in code.

- B O E
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.