The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 4th, 2024, 2:18pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › Conversion of extraxted view generated in calibre to extracted view in cadence..
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Conversion of extraxted view generated in calibre to extracted view in cadence.. (Read 1823 times)
varun patial
Junior Member
**
Offline



Posts: 18
Conversion of extraxted view generated in calibre to extracted view in cadence..
May 09th, 2012, 10:07pm  
Hello respoected people,
I have done extraxtion of my LNA in calibre(RLC extraction) for post layout i needed to convert the extracted view generated by calibre(mentor graphics) to extracted view of cadence. pls help how i convert ..
regards
varun patial
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.