Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 20
th
, 2024, 12:33am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Other CAD Tools
›
Entry Tools
› gePointToFig()
‹
Previous topic
|
Next topic
›
Pages: 1
gePointToFig() (Read 3023 times)
ywguo
Community Fellow
Offline
Posts: 943
Shanghai, PRC
gePointToFig()
May 16
th
, 2012, 1:30am
Hi Guys,
Do you know what gePointToFig() is? Is that a built-in skill script? Any manual for it? Any comments are appreciated.
Best Regards,
Yawei
Back to top
IP Logged
boe
Community Fellow
Offline
Posts: 615
Re: gePointToFig()
Reply #1 -
May 16
th
, 2012, 9:32am
Yawei,
Cadence SKILL help says:
"Returns the ID of the object located at the coordinates given in l_list."
- B O E
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
»» Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.