The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 19th, 2024, 12:03pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › High-Speed I/O Design › Why ethernet RJ45 8P8C are wired in today's way?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Why ethernet RJ45 8P8C are wired in today's way? (Read 915 times)
neoflash
Community Fellow
*****
Offline

Mixed-Signal
Designer

Posts: 397
Why ethernet RJ45 8P8C are wired in today's way?
Aug 30th, 2012, 10:37pm  
Can't understand why RJ45 connector need to split pair-3 and put pair-1 in-between them?

Could anyone help explain the reason behind it?
Back to top
rj45_wiring.png  
 
rj45_wiring.png
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.