Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Aug 18^th, 2024, 9:29pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Analog Design › pulse detection circuit design

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

pulse detection circuit design (Read 2047 times)

lhlbluesky_lhl Senior Member Offline Posts: 115	pulse detection circuit design Jan 24^th, 2013, 6:06am i want to generate a pulse as the figure shows, when the burst number of A is larger than 3 (N>=3), yhe output B is the same as A, but when N<3, output C is all zero. i want to realize this as simply as possible. what circuit should i use here?
Back to top	3_001.jpg IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: pulse detection circuit design Reply #1 - Jan 25^th, 2013, 10:33am Got some logic? As in digital logic?
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

BackerShu Community Member Offline Posts: 64	Re: pulse detection circuit design Reply #2 - Jan 25^th, 2013, 10:46am What is the output of B when N<3?
Back to top	Thanks and Regards! BackerShu https://www.linkedin.com/pub/shu-guanghua/26/b72/711 IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.