The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 2nd, 2024, 9:22pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › SimVision as default waveform viewer using spectreVerilog
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
SimVision as default waveform viewer using spectreVerilog (Read 1290 times)
tstoll74
New Member
*
Offline



Posts: 1
SimVision as default waveform viewer using spectreVerilog
Aug 01st, 2013, 9:13am  
Hi all,
is it possible to choose the SimVision waveform viewer as default viewer when simulating spectre or spectreVerilog having the schematic probing activated?

Best regards,
Thomas
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.