The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 19th, 2024, 7:43pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Signal Design › CDR based SATA
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
CDR based SATA (Read 2945 times)
J_im
New Member
*
Offline



Posts: 5
CDR based SATA
Feb 07th, 2015, 10:49pm  
Hello Everyone,

Right now I am pursuing masters in Analog & Mixed Signals. I am going to work on Serial ATA(SATA) connection for motherboards. I have to make it work at 6 Gb/s by working on CDR(clock-data recovery circuit) of SATA. I need all possible references. Need help !
Back to top
 
 
View Profile   IP Logged
carlgrace
Senior Member
****
Offline



Posts: 231
Berkeley, CA
Re: CDR based SATA
Reply #1 - Feb 10th, 2015, 5:12pm  
You can learn a lot of what you need to know via course notes.  I highly recommend the notes on Broadband Communications ICs but Michael Green of UC Irvine.  You can get them here:

http://gram.eng.uci.edu/faculty/green/public/courses/270c/
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.