The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 5th, 2024, 11:17pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Downconversion RF Mixer Design in Hspice
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Downconversion RF Mixer Design in Hspice (Read 2267 times)
shiven pandya
New Member
*
Offline



Posts: 1
Downconversion RF Mixer Design in Hspice
Feb 19th, 2015, 12:02am  
hello all,
I'm designing a downconversion mixer in Mentorgraphics tool for 2.4 GHZ application.
To optimize the design i want to do MonteCarlo simulation in Hspice.
Can anyone help me finding IP3 and other parameters of mixer in HSPICE.
or .measure statement to find IP3 of mixer in hspice.?
Back to top
 
 
View Profile   IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1998
Massachusetts, USA
Re: Downconversion RF Mixer Design in Hspice
Reply #1 - Mar 26th, 2015, 7:05am  
IP3 is tricky to get accurately from a regular simulator; do you have access to HSPICE-RF (or Spectre-RF)?
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.