Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 25
th
, 2024, 1:06pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Analog Design
› What's the OD layer that I see on layout
‹
Previous topic
|
Next topic
›
Pages: 1
What's the OD layer that I see on layout (Read 11833 times)
iVenky
Senior Member
Offline
Posts: 101
Silicon Valley
What's the OD layer that I see on layout
Apr 07
th
, 2016, 5:18pm
Hi,
What does the layer OD mean on layout? Always wanted to know its expansion and what it actually means. Thanks
Back to top
IP Logged
loose-electron
Senior Fellow
Offline
Best Design Tool =
Capable Designers
Posts: 1638
San Diego California
Re: What's the OD layer that I see on layout
Reply #1 -
Apr 7
th
, 2016, 5:20pm
Usually means
Oxide Definition
Back to top
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
IP Logged
iVenky
Senior Member
Offline
Posts: 101
Silicon Valley
Re: What's the OD layer that I see on layout
Reply #2 -
Apr 8
th
, 2016, 12:07am
Thanks. Could you please explain what it means or what it is used for?
Back to top
IP Logged
RobG
Community Fellow
Offline
Posts: 570
Bozeman, MT
Re: What's the OD layer that I see on layout
Reply #3 -
Apr 11
th
, 2016, 8:59am
In TSMC it is diffusion.
Back to top
IP Logged
loose-electron
Senior Fellow
Offline
Best Design Tool =
Capable Designers
Posts: 1638
San Diego California
Re: What's the OD layer that I see on layout
Reply #4 -
Apr 20
th
, 2016, 7:54am
iVenky wrote
on Apr 8
th
, 2016, 12:07am:
Thanks. Could you please explain what it means or what it is used for?
https://www.edgefx.in/understanding-cmos-fabrication-technology/
layer by layer fabrication
Back to top
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
»» Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.