Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Apr 20^th, 2024, 7:11am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design Languages › Verilog-AMS › Ttally new to verilog -AMS. from where to start

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Ttally new to verilog -AMS. from where to start (Read 1625 times)

Liaquat Ali New Member Offline Posts: 1	Ttally new to verilog -AMS. from where to start Jan 25^th, 2017, 10:52am Dear all, I am totally new to verilog-A and Verilog-AMS. I have done some programming in verilog in Xilinx and with FPGA. I want to know from where I should start learning the verilog-AMS any book or website which give me start from zero. Where i can simulate the file where I can see the results of my work
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: Ttally new to verilog -AMS. from where to start Reply #1 - Jan 25^th, 2017, 1:17pm Probably your first step would be to look upwards at the top of this page to the "Books" link. There's an excellent Book (second on the page) by Ken (Kundert) and Olaf Zinke on VerilogAMS. The second step would be to look upwards at the top of the page to the "Verilog-AMS" link. Regards, Andrew.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.