The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 19th, 2019, 2:09pm
Pages: 1
Send Topic Print
Quantifying Eye Diagram for high-speed SERDES channel (Read 991 times)
aguntuk
Junior Member
**
Offline



Posts: 12
Dresden, Germany
Quantifying Eye Diagram for high-speed SERDES channel
Jan 19th, 2018, 8:54am
 
Hello,
I need help quantifying Eye Diagram. I have to quantify Eye Diagram at the end of my Thesis for my Serial Link channel. Viewing an Eye Diagram, I can say probably whether it is bad or good. But for the hypothesis or any conclusion qualitative analysis is not enough. I need to have quantitative analysis. I know what parameters are there like jitter, eye width, height, crossing level etc. etc. But how to say up to which value of parameters the eye diagram is good. like how can I decide that like 35% BER or x ps jitter is tolerable for the serial link (Though it depends on circuit & signaling techniques etc...)? Simply to ask what separates a good ee diagram from a bad one?

If you have any note or suggestion or anything regarding my specific question will be appreciated also.
Back to top
 
 
View Profile   IP Logged
repah
Community Member
***
Offline



Posts: 38

Re: Quantifying Eye Diagram for high-speed SERDES channel
Reply #1 - Apr 17th, 2018, 2:46pm
 
https://3.bp.blogspot.com/-p8AaUls28Zo/V1cxhlEBfBI/AAAAAAAABBc/Eez7hacJeOcvbl-3E...
lpzMIFzRvJi_TOzwCLcB/s1600/36.jpg

(copy whole link and put in browser)
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2019 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.