The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 17th, 2024, 10:32pm
Pages: 1
Send Topic Print
Repairing an Infiniium oscilloscope DSO80204B (Read 1412 times)
nrk1
Community Member
***
Offline



Posts: 81

Repairing an Infiniium oscilloscope DSO80204B
Mar 24th, 2018, 7:12am
 
[This is about measurement equipment, but looked like the most appropriate forum]

We have an Infiniium oscilloscope DSO80204B which is now obsolete and no technical support is available from Keysight. It was working fine and abruptly stopped working a few months ago. We have traced it down to a faulty power supply module(image at https://drive.google.com/open?id=0Bx-nrboXc1_HZUU0ajhTRUd5MEUyMXRZZkYtLUVmOVd6R2...). Is there any place where this or a similar power supply would be available? or can be repaired. We will take responsibility for installing it.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.