sarthak
Junior Member
![* *](https://designers-guide.org/forum/Templates/Forum/default/starblue.gif)
Offline
Posts: 10
|
Hello, I am trying to calculate the phase noise of an injection locked PLL by calculating the DFT of the oscillator output waveform. In the DFT plot I see a lot of spurs appearing due to injection locking. But the amplitude level of spurs follows a sinc type distribution. Can someone explain where this sinc response comes from? Simulation parameters: Osc. Freq = 2.56GHz Ref. Freq = 64MHz Sinc zero crossing = 16.512GHz
|