The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 16th, 2024, 4:57pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › High-Speed I/O Design › How to plot eye for loop unrolled DFE
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
How to plot eye for loop unrolled DFE (Read 405 times)
neoflash
Community Fellow
*****
Offline

Mixed-Signal
Designer

Posts: 397
How to plot eye for loop unrolled DFE
Mar 18th, 2022, 10:55am  
curious how to plot the eye diagram as shown in the figure attached?

for loop unrolled DFE, each slicer eye is only valid for certain prior data. any good way to plot the valid eye only?
Back to top
unrolled_eye.png  
 
unrolled_eye.png
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.