The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 19th, 2024, 3:18pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Semiconductor Devices › Flicker noise reduction by switching
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Flicker noise reduction by switching (Read 4892 times)
oscillator_man
New Member
*
Offline



Posts: 3
Flicker noise reduction by switching
Feb 26th, 2003, 3:31am  
Hi: Grin
Do you know if that phenomenon is represented in BSIM3V3 or not?
(Flicker noise reduction by switching)
Thanks
Back to top
 
 
View Profile   IP Logged
Frank Wiedmann
Community Fellow
*****
Offline



Posts: 677
Munich, Germany
Re: Flicker noise reduction by switching
Reply #1 - Feb 26th, 2003, 4:57am  
I assume that you are referring to the effect described by A.P. van der Wel and E.A.M. Klumperink. I do not believe that this effect is included in the present models.

You can find detailed information about BSIM models at http://www-device.eecs.berkeley.edu/~bsim3/.
Back to top
 
 
View Profile WWW   IP Logged
oscillator_man
New Member
*
Offline



Posts: 3
Re: Flicker noise reduction by switching
Reply #2 - Feb 26th, 2003, 6:13am  
Yes I am refrerring to that effect.Thanks for your answer
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.