Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 20
th
, 2024, 5:48am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Modeling
›
Semiconductor Devices
› Flicker noise reduction by switching
‹
Previous topic
|
Next topic
›
Pages: 1
Flicker noise reduction by switching (Read 5005 times)
oscillator_man
New Member
Offline
Posts: 3
Flicker noise reduction by switching
Feb 26
th
, 2003, 3:31am
Hi:
Do you know if that phenomenon is represented in BSIM3V3 or not?
(Flicker noise reduction by switching)
Thanks
Back to top
IP Logged
Frank Wiedmann
Community Fellow
Offline
Posts: 678
Munich, Germany
Re: Flicker noise reduction by switching
Reply #1 -
Feb 26
th
, 2003, 4:57am
I assume that you are referring to the effect described by A.P. van der Wel and E.A.M. Klumperink. I do not believe that this effect is included in the present models.
You can find detailed information about BSIM models at
http://www-device.eecs.berkeley.edu/~bsim3/
.
Back to top
IP Logged
oscillator_man
New Member
Offline
Posts: 3
Re: Flicker noise reduction by switching
Reply #2 -
Feb 26
th
, 2003, 6:13am
Yes I am refrerring to that effect.Thanks for your answer
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
»» Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.