Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Apr 29^th, 2024, 2:09am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design Languages › Verilog-AMS › read data using $readmem

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

read data using $readmem (Read 3440 times)

bricesg New Member Offline Posts: 1	read data using $readmem Jan 02^nd, 2005, 4:34am hi, I am new to verilog, can someone help me with the following problems: how to read data using the $readmem? what format the data file should be saved as? Thanks!
Back to top	IP Logged

mgehring New Member Offline Posts: 6 Portland, OR	Re: read data using $readmem Reply #1 - Mar 7^th, 2005, 12:47pm You may want to try the $table_model function to do this. It is described under "interpolation" in the Nov 2004 V2.2 Accellera manual ( section 10.12, p 232 ). Mark
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: read data using $readmem Reply #2 - Mar 8^th, 2005, 1:24am If using $readmem - read the Verilog Reference manual that comes with the software. Reading the manual is generally a wise thing to do before asking the whole world. Andrew.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.