The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 2nd, 2024, 11:04pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Signal Design › USB cable model
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
USB cable model (Read 1802 times)
BensonLin
Guest
USB cable model
Mar 13th, 2005, 9:01pm  
Dear all:
        I need the USB cable model for the simulation of
USB PHY. Can any one tell me how to build it? Or, can
any one send me a copy if possible?
Thank you!
Best regards.
Benson
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.