Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
May 2
nd
, 2024, 3:11am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› how to model a charge pump
‹
Previous topic
|
Next topic
›
Pages: 1
how to model a charge pump (Read 3653 times)
dingforrest
New Member
Offline
Posts: 4
how to model a charge pump
Aug 28
th
, 2005, 1:29am
Hello everybody,
i am a beginner of verilog AMS language, and want to model a charge pump
thank you for your help!
Back to top
IP Logged
trond
Senior Member
Offline
Posts: 168
Glasgow, Scotland
Re: how to model a charge pump
Reply #1 -
Aug 28
th
, 2005, 1:39am
If you have a look at the Verilog AMS section on this site, you will find examples of a charge pump. Have a look at the PLL models which contain CPs.
Back to top
IP Logged
sheldon
Community Fellow
Offline
Posts: 751
Re: how to model a charge pump
Reply #2 -
Aug 28
th
, 2005, 5:12am
Analogcn,
Do you mean a Charge Pump used in a PLL or do you
mean a Charge Pump for dc-to-dc conversion?
Best Regards,
Sheldon
Back to top
IP Logged
dingforrest
New Member
Offline
Posts: 4
Re: how to model a charge pump
Reply #3 -
Sep 13
th
, 2005, 5:37pm
Hello Sheldon,
I wanna model a Charge Pump for DC-DC converter to double voltage. Would you give me an example? Thanks!
analogcn
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.