Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

May 1^st, 2024, 9:08pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design Languages › Verilog-AMS › how to model a charge pump

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

how to model a charge pump (Read 3652 times)

dingforrest New Member Offline Posts: 4	how to model a charge pump Aug 28^th, 2005, 1:29am Hello everybody, i am a beginner of verilog AMS language, and want to model a charge pump thank you for your help!
Back to top	IP Logged

trond Senior Member Offline Posts: 168 Glasgow, Scotland	Re: how to model a charge pump Reply #1 - Aug 28^th, 2005, 1:39am If you have a look at the Verilog AMS section on this site, you will find examples of a charge pump. Have a look at the PLL models which contain CPs.
Back to top	IP Logged

sheldon Community Fellow Offline Posts: 751	Re: how to model a charge pump Reply #2 - Aug 28^th, 2005, 5:12am Analogcn, Do you mean a Charge Pump used in a PLL or do you mean a Charge Pump for dc-to-dc conversion? Best Regards, Sheldon
Back to top	IP Logged

dingforrest New Member Offline Posts: 4	Re: how to model a charge pump Reply #3 - Sep 13^th, 2005, 5:37pm Hello Sheldon, I wanna model a Charge Pump for DC-DC converter to double voltage. Would you give me an example? Thanks! analogcn
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.