Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Aug 16^th, 2024, 4:27am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › RF Simulators › gear_order

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

gear_order (Read 2745 times)

wued New Member Offline Posts: 7	gear_order Aug 30^th, 2005, 1:47am hi,all: in pnoise simulation,there is convergence parameter: gear_order.What mean about it and how to select? thanks
Back to top	IP Logged

Geoffrey_Coram Senior Fellow Offline Posts: 1999 Massachusetts, USA	Re: gear_order Reply #1 - Aug 30^th, 2005, 4:28am Interesting -- this is different from the "method=gear" transient analysis option; the documentation says "Gear order used for small-signal integration." and it's specifically a Pnoise option. I've never used it myself.
Back to top	If at first you do succeed, STOP, raise your standards, and stop wasting your time. IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: gear_order Reply #2 - Sep 5^th, 2005, 1:08am I too have never used it. Perhaps Ken can elaborate what it's for - I think it's one of those "do not touch" options... Andrew.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.