Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Aug 16^th, 2024, 12:22am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › RF Simulators › SpectreRF&SPICE BJT mlodels!!

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

SpectreRF&SPICE BJT mlodels!! (Read 2722 times)

fchirouf Junior Member Offline Posts: 15	SpectreRF&SPICE BJT mlodels!! Sep 30^th, 2005, 1:34am Hi all I have a try to obtain the same transient simulation results when I simulate a simple BJT amplifier circuit with SpectreRF. I think that SpectreRF doesn�t accepte SPICE model. It has a way that I say to accept directly a SPICE model. I think BJT SpectreRF model is different to SPICE models!! Advance Thinks
Back to top	OX Designer IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: SpectreRF&SPICE BJT mlodels!! Reply #1 - Sep 30^th, 2005, 2:09am Nope. That's not it. Spectre can quite happily read SPICE models (and in the latest versions it can do this even more directly with the new front end in spectre). SpectreRF doesn't require different models to Spectre - it's the same simulator. So what really is your problem? Regards, Andrew.
Back to top	IP Logged

fchirouf Junior Member Offline Posts: 15	Re: SpectreRF&SPICE BJT mlodels!! Reply #2 - Sep 30^th, 2005, 2:36am so, i did including the SPICE device model as habituel area in netlist circuit : include "../../res.scs" section=restm include "../../cap.scs" section=captm include "../home/fchirouf/SPICE_BJT_models/2N2222.scs" So, spectreRF can read with out any problem the SPICE model BJT in fil 2N2222.scs
Back to top	OX Designer IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.